Eight-color 28x40" offset press with:
Print Quality Console:
- AMR Command
- PQC-S - Remote control console
- Machine status visualization
- Wash settings (blanket, roller, cylinder)
- PQA-S – camera inspection system
- KHS-AI - Intelligent system with self-learning function for de-inking and pre-inking activities.
- Daylight lamp above the PQC-S
- PDC-SX Spectrophotometric Quality Control (integrated type)
- KID - Komori information display system.
- KMS V Monitoring System
- Automatic Blanket washer with 4 different washing programs
- Automatic Impression cylinder washer with 4 different washing programs
- Automatic Roller washing with 4 different washing programs
- Automatic coating unit washing system
Printing Unit
- Automatic plate change (FAPC) without tail bending and with programmed sequence
- Plate mounting accuracy of 0.05 mm. Plate changes do not require operator presence.
- Plate cylinders with anti-rust treatment
- Blanket cylinders with anti-rust treatment
- Double-diameter impression cylinders with anti-rust treatment
- Ink mist extraction system for each printing unit.
- Set for printing on plastic or metallic substrates
Delivery:
- Antistatic bar at the exit
- Cam adjustment with motorized gripper opening, programmable and with speed compensation
- Start/stop dampening controls
- Start/stop inking controls
- Ink and dampening roller engagement/disengagement control for fast de-inking
Ink & Dampening System
- Dampening liquid level sensor
- Mechanical compensator for roller contact - Ensures consistent contact between rollers.
- Cooling system for three oscillating inking rollers with temperature control unit
- inking stability at any print speed, including long runs.
- Remote ink distribution control between front and back rollers
- Motorized ink fountain roller
- Remote control of take-up roller timing
- Anti-ghosting rollers for B and C with manual on/off system
- Dual-purpose rollers replacing conventional ones (for HUV and/or UV printing)
Coating Unit
- Inline Coater System Type V with 2000 mm extended exit
- Remote control for washing, registration, and paper thickness
- Exit anti-shadow grippers
- 1 Anilox chamber system with 1 anilox roller
- 1 Varnish circulation unit
- Blanket clamp opening/closing for each coater without tools
Sheet Feeding
- Steel pallet plate
- Diagonal movement of the sheet pickup mm. 0.3 with remote control
- Automatic pile side control
- Pneumatic squaring
- Double sensing foot with ionizing antistatic blower
- Preset of side blowers
- Antistatic bar
- Feeder table with suction belt
- Format presets
- Mechanical double-sheet control
- Ultrasonic double-sheet control
- Micrometric adjustment of the side squaring via touch panel +/- 3 mm
- Fiber optic precision photocell system for front and side control + safety photocell for early sheet detection
- Automatic machine stop via over-register sensor
- Mechanical sheet stop in case of misregistration or skewed sheet
- Paper deformation compensator placed on the feed cylinder with remote control
- Machine elevation setup of 300 mm (excluding foundation block)
HUV System is equipped as follows:
- End of press: 1 lamp (H-UV lamp and a conventional UV lamp)
- Drying unit: 1 lamp (H-UV lamp and a conventional UV lamp)
- Interdeck: 3 interdeck lamps moveable between 5 positions (H-UV lamp and a conventional UV lamp)